News

Compared with asynchronous motors, permanent magnet synchronous motors have obvious advantages. They have high efficiency, high power factor, good performance indicators, small size, light weight, low temperature rise, significant technical effects, 

For motor products, on the one hand, customers should be made aware of the maintenance and care items during the operation of the motor through appropriate means; on the other hand, experience and common sense should be accumulated continuously.

Business import:
In the UAE, companies need to meet the following conditions to import goods:
1. Company registration: First, the company must register with the UAE Business Registry and obtain a valid business license.
2. Customs registration: Then, the company needs to register with the UAE Federal Customs Authority (FCA) and obtain a customs import code,
3. Relevant licenses: For certain types of goods (for example, food, medicine, cosmetics, etc.), approval or permission from relevant government departments must be obtained before

Types and characteristics of couplings

1. Rigid couplings:
•Features: No displacement between the shafts is allowed, suitable for situations where the two shafts have good alignment.
•Types: including sleeve couplings, clamp couplings, flange couplings, etc.

Shaft current is a common and unavoidable problem for high-voltage motors and variable-frequency motors. Shaft current can cause great damage to the bearing system of the motor. For this reason, many motor manufacturers will use insulating bearing systems or bypass measures to avoid shaft current problems.

Thin bars or broken bars are commonly used fault terms in cast aluminum rotor motors. Both thin bars and broken bars refer to the rotor bars. Theoretically, once the rotor's punching slot shape, iron length, and slot slope are determined, the rotor bars are outlined in a very regular shape. However, in the actual manufacturing process, various reasons often cause the final rotor bars to be twisted and deformed, and even shrinkage holes appear inside the bars. In severe cases, the bars may break.

The stability and improvement of motor performance is due to the level of design on the one hand, and the realization of product design through manufacturing process is also very important on the other hand. Especially in the case of tight inner cavity of some motors, necessary measures are needed to ensure the basic conditions of electrical insulation and ventilation and heat dissipation during the operation of the motor.

The following factors should be considered when selecting the fixed end of the motor bearing support (referred to as the motor fixed end): (1) the precision control requirements of the driven equipment; (2) the nature of the load driven by the motor; (3) the bearing or bearing combination must be able to withstand a certain axial force. Based on the above three design factors, deep groove ball bearings are more often used as the first choice for the motor fixed end bearing in small and medium-sized motors.

With the continuous improvement of industrial production requirements for crane speed regulation performance, the common traditional crane speed regulation methods such as winding rotor asynchronous motor rotor series resistance speed regulation, thyristor stator voltage regulation speed regulation and cascade speed regulation have the following common disadvantages: the winding rotor asynchronous motor has collector rings and brushes, which require regular maintenance. Failures caused by collector rings and brushes are more common. In addition, the use of a large number of relays and contactors results in a large amount of on-site maintenance, a high failure rate of the speed regulation system, and poor comprehensive technical indicators of the speed regulation system, which can no longer meet the special requirements of industrial production.