News

With the rapid development of power electronics technology and new semiconductor devices, AC speed regulation technology has been continuously improved and enhanced. The gradually improved frequency converter 

The IC611 is a model of a motor control or protection relay, and in the context of electric motors, cooling methods are crucial to ensure the relay functions correctly and reliably. For the IC611 or similar devices, cooling methods typically involve:

The noise of electric motors can be divided into three categories: aerodynamic, mechanical and electromagnetic noise sources. In recent years, people have paid more and more attention to the impact of electromagnetic noise sources. This is mainly due to two reasons: (a) for small and medium-sized motors, especially motors rated below 1.5kW

The principle of the motor: The principle of the motor is very simple. Simply put, it is a device that uses electrical energy to generate a rotating magnetic field on the coil and drives the rotor to rotate. 

For motors connected to frequency converters, the maximum surface temperature shall be determined by test methods under the most unfavorable conditions

When selecting a motor for a pipeline conveyor, the first thing to consider is whether the power of the motor matches the load requirements of the conveyor. Excessive power may lead to energy waste, while insufficient power will overload the motor and shorten the service life of the equipment

Recently, the topic of IE5 motors has been "incessantly heard". Has the era of IE5 motors really arrived? The advent of an era must represent that everything is ready to go. Let us unveil the mystery of high-efficiency motors together.

Compared with wound rotors, cage rotors have relatively better quality and safety, but cage rotors will also have quality problems in situations with frequent starting and large rotational inertia.

In order to better guide consumers to use high-efficiency motors, our country adopts energy efficiency label management for basic series motors. Such motors should be registered on the China Energy Efficiency Label Network and the corresponding energy efficiency logo should be affixed to the motor body.
Taking the more commonly used YE2, YE3, YE4 and YE5 motors as an example, the same energy efficiency may not be an energy-saving motor in different periods. To determine whether the motor is an energy-saving motor, it must correspond to the GB18613 standard valid at the time. The energy efficiency of the motor is divided into 3 levels, level 1 is the highest level, and level 3 is the energy efficiency requirement that the motor must meet, that is, the minimum limit value requirement, that is, the efficiency level of this type of motor is not lower than the limit value requirement before it can enter the market for sale.

Motor bearing noise has always been a problem that troubles many engineers. As mentioned in the previous article, the noise of motor bearings cannot be described in words, so it often brings trouble to motor technicians in judging.
However, after a long period of on-site practice, coupled with the mastery and analysis of motor bearing knowledge, many useful on-site judgment criteria will be obtained. For example, what kind of "noise" is the "normal noise" of the bearing.